Searching for low cost, accessible, simple implementation, and environmentally friendly adsorbents has been one of the concern of researchers in recent years. Therefore, the aim of this study was to investigate the efficient phenol removal from a synthetic aqueous solution using iron-coated pumice...

The intent of this research is the investigation of the nitrate reduction from aqueous solution using biomass (pine cone (PC) and PC activated carbon (PCAC)) – supported zero valent iron nanoparticles (PC-Fe0 and PCAC-Fe0). The synthesis of these nano-bio-composites was based on the reduction of...

Methylene blue is one of the most widely used dyes in various industries such as textiles and dyeing which, due to toxicity, causes several environmental problems as well as difficulties in wastewater treatment process. Therefore, many studies have been carried out on the removal of the dye from...

In this research, the Ag2CO3-PANI composite was synthesized with a simple precipitation method and then used as an effective adsorbent for adsorption of Methylene Blue cationic dyes from aqueous solution. Characterization of the adsorbent was carried out using UV–visible diffuse reflectance...

A facile strategy toward modification of aluminium filings (AF), a waste material from aluminium manufacturing industry, into a highly efficient adsorbent was examined. AF was simply treated with thermal modification to form a cheap adsorbent for Phosphorus (P) removal from aqueous solutions. The...

The Membrane Bio-Reactor (MBR) technology offers a series of environmentally-friendly advantages, such as high quality effluent, pathogens removal capacity and avoided use of chemicals for disinfection, allowing it to be regarded as an environmentally friendly technology, when applied for wastewater...

The objective of this study is to examine the ability of a compost material for removing {Cu}^{2+} from aqueous solutions with different parameters using continuous fixed-bed column. Compost was characterized by using Fourier transform infrared spectroscopy which revealed that the metal binding is...

Removal of Co(II) ions from aqueous solutions using chitosan-vanillin (polymer I) and chitosan-ortho-vanillin (polymer II) adsorbents has been investigated under different experimental conditions. The effect of pH, contact time, adsorbent mass, temperature, and initial concentration of studied ion...

The main objective of this study is to review the role of phosphorus in fertilizers, emphasizing in phosphate rock which is the primary source for phosphate fertilizer, with reference to harmful heavy metals as a consequence of their use. Simultaneously, this study examined the use of P-Adsorption...

The present study investigated the possible effect of contact time, initial nickel concentration, and adsorbent concentration on removing Ni (II) ion, which is toxic to living organisms, from the aqueous media using nano zero valent iron (nZVI) and nano zero valent iron coated powdered activated...

The removal of Lead (II) from aqueous solutions using Fagopyrum esculentum Moench (Buckwheat) and Bambusa vulgaris (common bamboo) as adsorbents was investigated. The effects of various experimental parameters such as initial concentration, contact time and pH have been studied using batch...

In this study, raw boron enrichment waste was treated with hydrochloric acid and ultrasound at 35-kHz frequency for 60 minutes. To optimize the adsorption conditions for removal of methylene blue (MB) from synthetic wastewaters using raw boron enrichment waste (BEW), acid modified boron enrichment...

Clay of the Middle Atlas Mountains region, Morocco, was used to investigate the removal of heavy metals ions (Cadmium and Copper) from aqueous solutions with respect to several experimental conditions including pH, contact time, initial solute concentrations, temperature and ionic strength. Kinetic...

In this study, dehydrated cottonseed cake as a low-cost and abundant byproduct in Turkey was utilized as an adsorbent for the decolorization of Reactive Blue 19 (RB19) and Reactive Yellow 145 (RY145) from aqueous solutions based on adsorption and ultrasound-assisted adsorption (UAA). Decolorization...

Response surface methodology has been used to design experiments and to optimize the effect of independent variables responsible for higher adsorption of humic substances by activated carbon supported nanoscale zero-valent iron from aqueous solutions. The variables of initial concentration, time, pH...

In this paper, the removal of Maxilon Red GRL by adsorption onto raw soil sample known as Niğde (Bor) grape molasses soil and Fe+2/H2O2 reagent as advanced treatment processes were investigated. The effects of various experimental parameters such as initial Fe+2 and H2O2 concentrations, pH...

The activated charcoal (AC) was synthesized from banana leaf rim (BLR) through three activation methods; physical (BLRC), chemical (Z BLRC, zinc chloride) and microwave activation (MW BLRC). The AC was characterized using fourier transform infrared spectrometer (FT-IR), Thermogravimetric analysis...

The slag generated in the rotary furnaces is classified hazardous waste. In this regard, landfill disposal of lead smelting slag is not feasible since a few hundred tons are produced per year; leaching of heavy metals into ground water is of concern. The release of heavy metals into the environment...

Herein, we describe the batch and fixed-bed column adsorption of Cu2+ and Pb2+ by raw and treated date palm leaves (DP) and orange peel (OP) waste biomass. Contact time, pH, adsorbent dose, and particle size were optimized in batch adsorption experiments, while breakthrough curves obtained in fixed...

This study describes the removal of Cr (VI) ions from aqueous solutions using silver oxide/sawdust nanocomposite (Ag2O/SD NC) that was prepared using the chemical precipitation method. Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FT-IR)...

The purpose of this study was to investigate the adsorption properties of locally available sepiolite and clinoptilolite materials as adsorbents for the removal of crystal violet and congo red dye ions from aqueous solution. Previous experiments have revealed that two variables, concentration and...

This study investigates the adsorption kinetics and removal conditions of copper by walnut tree sawdust from synthetic solutions in the batch and fixed bed reactors. The selected experimental parameters for the batch reactor were concentration, solution pH, adsorbent amount and temperature. The...

In this study, potential of okra leaves for the removal of Ni(II), Cu(II), Pb(II) and Cd(II) from the mixed metal aqueous solution were evaluated. The data were analyzed by Freundlich, Langmuir, D-R, Flory-Huggins and Halsey adsorption models. Pseudo first order rate, Pseudo second order rate...

Low concentrations of contaminants in rainwater is the primary benefit of transforming it as an alternative source of drinking water. However, treatment is necessary as rainwater collects contaminants that are persistent in the environment such as lindane and E.coli. The combination of...

The composite media, Zeliac TM was developed with the initial aim to provide low cost adsorbent with promising adsorption capacity. This study was conducted to investigate the removal of UV absorbance at 254 nm (UV 254) in Kerian river water using Zeliac TM as the media. Batch experiments study was...