The solar evaporative crystallization process at Lake Katwe was studied using brine evaporation rates, thermal, convection, and radiation energy losses as well as reported meteorological data around the salt lake basin. A simulation model of a salt pan was developed on a lumped basis to study its...

Thermogravimetric analysis combined with a mass spectroscopy detector was used to study the thermal stability of solid materials earmarked for processing by thermal desorption (for example during the amelioration of environmental damage). The objective of the study was to verify the applicability of...

This paper aims to investigate students’ awareness regarding the factors that affect the environmental quality in university classrooms. For this purpose a questionnaire survey was conducted, in which 314 undergraduate students of the School of Primary Education, Aristotle University of Thessaloniki...

Iron and steel industry generates substantial amount of inorganic solid wastes namely blast furnace (BF), Linz-Donawitz (LD) slag from the metallurgical process and fly ash from thermal power plant which creates environmental pollution when dumped in open land. In this investigation, BF and LD slag...

A set of experiments have been carried out in a heavy duty single cylinder engine using high EGR rates and different start of injection angles ( SOI). Three different fuels (conventional diesel fuel, a diesel-ethanol mixture (e-diesel) and a Fischer-Tropsch fuel (GTL)) have been tested in order to...

Tubular halloysite clay mineral and nanocrystalline TiO 2 were incorporated in the preparation of nanocomposite films on glass substrates via sol-gel method at 450ºC. The synthesis involves a simple chemical method employing nonionic surfactant molecule as pore directing agent along with the acetic...

The production of bio-pellets is an alternative to add value to the residual biomass of the oil palm-extraction process. In this work, an experimental study of the pelletising process of oil palm residual biomass blends is presented. An experimental full factorial design that uses as factors the...

This study focuses on the estimation of thermal comfort conditions in a high alt. site (1455 m) in Apodotia (MA), Greece, by using the MLP neural network model. This estimation is based on the air temperature (t) and relative humidity (f) data of the middle (1078-1163 m) and of the low altitude...

The aim of this paper is to present in a useful and understandable way how climatic change could be interpreted for tourism and recreation. Future climate change conditions are analyzed using the Climate Version of the Local Model (CLM) based on the COSMO model, which is currently used – among other...

This study investigates the thermal and bioclimatic conditions in Erzurum plain and the nearby Palandoken Mountains. The data was obtained from Erzurum Meteorological Station (1758 m) and Palandoken Mountains Meteorological Station (2973 m) for 2009 and 2010 in order to compute physiologically...

Outdoor recreation is an important issue for people living in areas where they face problems caused by harsh climatic features like the city of Erzurum. The aim of this study was to determine the favourable features of tree species, which can grow in the city, for human bioclimatic comfort...

In this paper we propose a framework for energy audit and renewable energy utilization for a Mediterranean fish hatchery station. A concise literature review concerning the use of renewables in aquaculture is provided, followed by a step by step framework for energy audit in aquaculture stations...

Solar saltworks are most efficient converters of solar energy into an inorganic commodity. Conversion rate of solar radiation into removal of water vapour from the brine takes place with 45% efficiency. Solar salt requires only a fraction of man made energy compared with salt produced by solution...

In a composting process the monitoring of heat flows is a useful tool in terms of phenomenological comprehension and diagnosis of the process. Indeed, the temperature fields are generic markers of the micro-biological phenomena governing a composting process. Moreover, as heat flows are largely...

Halide gases used in various industrial processes significantly contribute to the greenhouse effect owing to their high GWPs. In addition, the halide gases have high chemical stability and thus remain in the atmosphere for a long period. Therefore, effective treatment techniques of halide gases are...

During the last years, the waste electrical and electronic equipment (WEEE) are gathering attention, as a very special section of waste. In fact, they have been proven to be source for the recovery of metals. In the present study printed circuit boards (PCBs) were cut and treated thermally at 500oC...

In this study, ASTER (Advanced Spaceborne Thermal Emission and Reflection Radiometer) stereo imagery was analysed in combination with Global Positioning System (GPS) data and field observations, using Geographical Information Systems (GIS) techniques to examine the potential of satellite remote...

The present studies aimed to obtain clean fuel combustion and get detailed information about the processes that determine the electric field effect on NOx formation in flame channel flows. The experimental studies demonstrate that the interaction between the radial electric field and the flame...

A main problem related to coal ash disposal is the heavy metal content of the residue. In this regard, experimental results of numerous studies have indicated that toxic trace metals may leach when fly ash and bottom ash contacts with water. In this study, fly ash and bottom ash samples obtained...

Human thermal comfort conditions were determined in two mountainous regions of Greece, Gerania mountains (MG) in east continental Greece, and mountainous Nafpaktia (MN) in west continental Greece. Both regions are unexploited with considerable tourist potential. Four sites in each study region were...

Owing to its higher efficiency and versatility, gasification is seen as a necessary evolution in the development of biomass energy systems. This technology has been primarily tested in fixed bed (updraft and downdraft) and fluidised bed reaction systems, with less information available about the...

To describe the tourism potential of an area, not only single meteorological parameters have to be taken into account, but also thermal sensation and people’s thermal comfort. The latter can be estimated by the use of human energy balance models and the derived thermal indices, which comprise all...

Anaerobic digestion of olive-mill wastewater (OMW) was carried out in a continuously fed mode bioreactor. The bioreactor was operated at different hydraulic retention times (HRTs), using OMW, either raw or pre-treated with white-rot fungi. Two different kinds of feed were tested in this process, one...

The waste to renewable energy source has become a priority in the wastes treatment field. The research goal is not only the wastes destruction but also a better thermal energy recovery from the processes. The municipal solid waste presents a high heterogeneity degree from the dimensional point of...

Poor landfill gases cannot be used to drive gas engines or be burnt in gas flares. This follows why the combustion flame front velocity for poor gases becomes very low. From this moment the non-flammable poor landfill gases are polluting the environment. An energetical utilisation of very poor...