Pollution levels in an urban street-canyon area are determined numerically as part of the European research project OSCAR using the ADREA-HF code. Aim of the modeling is twofold: (i) to investigate the flow-field and carbon monoxide (CO) concentrations in the area and (ii) compare with measurements...

The conventional landfilling does not promote sustainable waste management due to uncontrolled emissions which potentially degrade the environment. In this regard, pre-treatment of municipal solid waste prior to landfilling significantly enhance waste stabilization and provides various advantages...

Analysis and simulation of the behaviour of gas turbines for power generation using different nonconventional fuels obtained from different renewable sources are presented. Three biomass-tobiofuel processes are considered: anaerobic digestion of biomass (biogas), biomass gasification (synthesis gas)...

Chelating resins based on immobilised oxines are attractive solid-phase extraction (SPE) materials in the analysis of trace metals from environmental samples. The most common immobilisation procedure for bonding oxines to silica supports is time-consuming and incompatible with “green chemistry”...

Artificial neural networks (ANNs) are being used increasingly to predict water variables. This study offers an alternative approach to quantify the relationship between time of chlorination in potable water (due to convectional treatment procedure) and chlorination by-products concentration...

A 3-D hybrid turbulence model, simulating the transport and fate of oil spills in various waters, is used to evaluate the influence of natural dispersion on the spreading of water-in-oil emulsions formed in the water column. The model combines the Navier-Stokes equations for two-phase flows, the RNG...

An Upflow Anaerobic Sludge Bed (UASB) reactor was used to evaluate mesophilic anaerobic treatment of a pre-acidified fruit wastewater. The system was operated at increasing volumetric loading rates by sequentially increasing wastewater flowrate. The operational temperature was maintained initially...

The new Air Quality Directive (2008/50/EC) encourages the introduction of modelling as a necessary tool for air quality assessment and management. Towards this aim, a new Air Quality Management System (AQMS) has been developed and installed in the Department of Labour Inspection of the Republic of...

In this paper, three-dimensional numerical simulations are used to simulate the wind flow structure over coal stockpiles of a real configuration of a power plant. Two configurations are tested for various wind directions: the first one without representing the buildings and the second one with the...

Numerous methods have been developed for the quantitative assessment of eutrophication: statistical techniques, simulation models and water quality indicators are the most widely used techniques to assess trophic levels. All these methods share a common goal: to evaluate the environmental impact due...

In this study, a model for stationary container system is presented to estimate collection time based on population density per 100 m road distance (LPD100). The model also estimates travel and collection times, and time spent on waiting at stop signs and traffic lights separately for stationary...

Coastal hydrodynamics are directly related to important environmental and ecological issues. This paper focuses on the study of harmful phytoplankton cells’ dispersion, after an episode of an algal bloom, based on mathematical modeling. The case of Thermaikos Gulf was used for the simulation. The...

The use of phosphate slime or phosphate water in a Mediterranean region (Gafsa, Tunisia) was investigated through hydrologic modeling. The simulations were made using the Hydrus 1D software package for a typical soil in the area of Gafsa (Tunisia). Two main applications were examined: mixing the...

The adsorption of the herbicide atrazine in packed beds filled with solids modelling soil components, (silica and humic acid), was studied at conditions simulating the adsorption of atrazine in cultivated soils. The choice of only two constituents of soil in the experimental study was based on the...

A mathematical model to simulate microbial growth and lag time is proposed in the present work in accordance with Sengor et al. (2009). The model is verified experimentally for a mixed microbial culture growing at metal free and at Cr(III) or Cr(VI) contaminated environments. The model is further...

Lead (Pb) particles that detach from the plumbing and contaminate drinking water can pose a significant health threat, which is often underestimated. Laboratory simulation of this problem revealed that standard quantification protocols in the US may miss 80% of the lead present in the water. At the...

Simulations were performed of the 3-D hydrodynamic circulation and of the associated water quality behavior in Mornos Reservoir, under real environmental conditions, during the period 2003-2005. The water quality simulations, guided by observations taken at the contributing tributaries and at the...

Τhis paper focuses on optimal management of aquifers with pollution problems. Genetic algorithms are used as the optimization tool, while advective pollutant transport is simulated by means of a moving point technique. The approach is illustrated by means of two application examples. In the first we...

Vehicle emissions constitute the main source of atmospheric pollution in modern cities. The increasing number of passenger cars, especially during the last decade, resulted in composite traffic problems with serious consequences on emissions and fuel consumption. This project was carried out in the...

ADREA-HF, which is a Computational Fluid Dynamics (CFD) code, is utilised in order to numerically study the flow and concentration fields within a street-canyon area. The selected site is Runeberg Str., a typical urban street canyon with an aspect ratio of approximately 1:1 in Helsinki, Finland. The...

Urban air quality nowadays is one of the major environmental issues, due to its impact to various health problems, caused by the daily exposure of the population in dangerous air pollutants. The highest levels of air pollutants are usually observed in street canyons, emitted by urban traffic. To...

In the electroplating process, various metal salts are used and the residues on the surface of electroplated materials are rinsed out as wastewater, followed by hydration in a wastewater disposal step. Although a variety of metals are concentrated in the sludge, the mixed heterogeneous state of...

At present, chemical processes are widely used to remove phosphorus and organic matter from water or wastewater either as the only advanced treatment method or as a pre-treatment stage to biological treatment, and aluminium salts have been traditionally used as coagulants. In the present study...

Sewer systems may often operate as bioreactors causing considerable wastewater quality changes and in some cases reducing the pollution load conveyed to the treatment plant. Conceptually, transformation of organic matter takes place both in the bulk water (by suspended micro-organisms) and by the...

Salinity is a common problem in Greek islands, especially, during the summer period when the saltwater intrusion becomes more severe due to extensive over pumping. In the past few years, the industrial zone of the City of Herakleio in Crete appears to have an increasing water demand as result of the...