The removal of mercury by adsorption process using fly ash was investigated in this study. Mercury removal capacity of fly ash was performed by batch mode adsorption experiment with the effect of various parameters i.e., contact time (0.5-3.5) h, pH of 2-10, concentration of adsorbate (1, 5 and 10)...

This paper is focused on modelling the degradation of micropollutants by solar photo-Fenton at pilot plan scale. To this aim, a three pesticide mixture (acetamiprid, thiabendazole and imazalil, 100 μg l -1 each) was treated by photo-Fenton in simulated secondary effluent. The model covered a wide...

The purpose of the present work is to test the possibility of using the spent tea dust and raw coir pith for the removal of methylene blue (MB) from aqueous solution. The effects of the contact time, adsorbent dosage and solution pH were studied in batch experiments at 27 °C. Results showed that a...

Presence of antibiotics in the environment specially in aqueous environments is considered a major warning about health and environment. Thus, this study aims the efficiency of coupled process of Activated Carbon (AC) prepared from mango seed+ZnO under UV irradiation as an advanced oxidation process...

The effect of different operational parameters in UV/TiO2 process, such as initial dye concentration (20-50 mg l-1), light intensity (8-45 W m-2), pH (2.83-10.22), hydrogen peroxide concentration (100-500 mg l-1), temperature (21-45 ˚C) and photocatalyst concentration (150-900 mg l-1) were...

This study aimed to evaluate the sorption capability of an inexpensive and easily available Moroccan clay, called locally Ghassoul, to remove Rhodamine B (Rh-B) from aqueous solution. Experimental results showed that the equilibrium sorption data fitted well with the Langmuir isotherm and the...

In this study, the removal of a cationic dye, basic red 18, used in the textile industry with montmorillonite was investigated as a function of initial dye concentration, pH, agitation speed, adsorbent dosage, ionic strength, and temperature. Adsorption process was attained to the equilibrium within...

The unintended release of hydrocarbons into the environment can negatively impact human and animal health, and could further change the characteristics of soils. The aim of the present work was to investigate the rate of biodegradation at 10 and 20% diesel fuel in contaminated soil amended with 10%...

Treatment of young landfill leachate, collected from municipal solid waste site of city of Konya, was investigated by using the Fenton process. The leachate itself showed the characteristics of pH 7.25, COD 38.2 g L-1 and BOD5 22 g L-1. Ratio of BOD5 to COD with 0.58 indicates that leachate can be...

The effect of ultrasonic waves (US) was studied on the degradation of Malachite Green (MG) as a model contaminant from textile industry by direct photolysis with ultraviolet (UV) radiation and UV/H2O2 processes. The US (35 kHz) and UV (253.7 nm) radiations were carried out with an ultrasonic bath...

Heterogeneous photocatalysis is an advanced oxidation process (AOP) which has been widely studied by numerous researchers in the world and is used to degrade or remove a wide range of pollutants in water and air. The photocatalytic oxidation and mineralization of phenol in aqueous catalyst...

The present work concerns the investigation of the chemical kinetics of H2S selective oxidation into elemental sulfur, by gas absorption and chemical reaction in Fe3+·(ΝΤΑ) aqueous solutions. By using initial reactivity data, priority is given to the study of intrinsic kinetics i.e. to avoid...

The kinetic studies on the removal of Acid Violet-17 (AV) by adsorption on various adsorbents such as fly ash (FA), iron chromium oxide (ICO), lignite coal (LC), kapok fruit shell carbon (KC) and cashew nut shell carbon (CC) have been made and the results have been compared with that of commercial...

Laboratory studies reported earlier, have shown very promising results in the selective removal of dyes from aqueous solutions by a commercially available (super absorbent polymer) SAP, Jalshakti® (JS). JS is mesoporous in nature and is a potential adsorbent for the basic dyes studied. This paper...

In the present work, wood and bone ash were used to remove metal cations from solutions. Cation-removal capacity of the ashes was analyzed by potentiometric titration. It was found that the capacity of wood ash was two times higher (37.3 meq g-1) than bone ash (15.2 meq g-1). Kinetics of metal ions...

The ability of activated carbon and different low-cost by-products and waste material as sorbents to remove various reactive dyes from aqueous solutions and wastewaters was investigated. All aqueous dye solutions contained 2,000 mg l-1 NaCl, to mimic real dye wastewater. Batch kinetic and isotherm...

The soil adsorption behaviour of atrazine and its photodegradation intermediate 4,6-diamino-2-chloro-1,3,5- s-triazine (I), was evaluated by measuring partition coefficients on five representative European topsoils using classical batch experiments. From this study, (I) appears to be less...

The photocatalytic degradation of protocatechuic acid, a biorecalcitrant polyphenolic compound typically found in olive processing and wine distillery waste waters, has been investigated in aqueous heterogeneous solutions containing semiconductor powders (TiO2, ZnO) as photocatalysts, both in the...

Samples were taken from Metamorphosis/Attica combined treatment plant for municipal wastewater and septage, which treats about 12000 m3 d-1 of municipal wastewater and 8000 m3 d-1 of septage, and analyzed for solids, COD, ammonia, nitrate, orthophosphate, polyphosphate and total phosphorus. Ammonia...

This research work has been focused in the study of gallinaceous feathers, a waste that may be valorised as sorbent, to remove the Dark Blue Astrazon 2RN (DBA) from Dystar. This study was focused on the following aspects: optimization of experimental conditions through factorial design methodology...

Water hyacinth Eichhornia crassipes was found to have biosorption capacity for cationic dyes, malachite green and methylene blue from aqueous solutions. To evaluate the biosorption capacity and characteristics, the effect of solution pH, initial dye concentration, temperature, dose of biosorbent...

The adsorption of Basic yellow 2 (BY2), from aqueous solutions onto Granular activated carbon (GAC) and its adsorption kinetics at different concentrations, GAC masses, initial pH values and temperatures were studied. The adsorption process was followed by an on-line spectrophotometric analysis...

An Upflow Anaerobic Sludge Bed (UASB) reactor was used to evaluate mesophilic anaerobic treatment of a pre-acidified fruit wastewater. The system was operated at increasing volumetric loading rates by sequentially increasing wastewater flowrate. The operational temperature was maintained initially...

The removal of heavy metals from wastewaters is a matter of paramount importance due to the fact that their high toxicity causes major environmental pollution problems. One of the most efficient, applicable and low cost methods for the removal of toxic metals from aqueous solutions is that of their...

The main goal of this research study was the removal of Cu(II), Ni(II) and Zn(II) from aqueous solutions using peanut hulls. This work was mainly focused on the following aspects: chemical characterization of the biosorbent, kinetic studies, study of the pH influence in mono-component systems...