In this study, potential of okra leaves for the removal of Ni(II), Cu(II), Pb(II) and Cd(II) from the mixed metal aqueous solution were evaluated. The data were analyzed by Freundlich, Langmuir, D-R, Flory-Huggins and Halsey adsorption models. Pseudo first order rate, Pseudo second order rate...

Hexavalent chromium Cr(VI) is one of the most toxic heavy metals in aqueous solutions, hence it is highly imperative to treat the wastewater containing Cr(VI) before its discharge. At present work, the rate of biosorption was studied under a variety of conditions, including initial Cr(VI)...

In last decades the search for new low cost sorbents that have heavy metal ions binding capabilities is a hot topic in the field of clean-up technologies. In this study, wastes of Romanian silver tree ( Abies alba) bark were explored for first time as green and economical sorbent for the removal of...

Low concentrations of contaminants in rainwater is the primary benefit of transforming it as an alternative source of drinking water. However, treatment is necessary as rainwater collects contaminants that are persistent in the environment such as lindane and E.coli. The combination of...

Bacteria from the genus Acinetobacter are opportunistic pathogens and cause harm to humans. In this study a new bacterial strain designated as Acinetobacter sp. 33F was isolated from municipal solid waste (MSW) leachate. This bacterium is useful as it degrades and utilizes dibutyl phthalate (DBP) as...

In the present study, adsorption potential of potassium permanganate (Hypermangan) modified zeolite was investigated for the removal of nitrate from synthetic wastewater. Effects of the most significant parameters (pH, adsorbent dose, nitrate concentration and contact time) were initially evaluated...

The aim of the present study was to synthesize a sorbent, for arsenic removal from aqueous solutions, reusing two waste materials (slag and red mud). The sorbent was prepared after chemical and thermal treatment, during which amorphous silica sol and FeOOH sol were produced simultaneously and form...

In this study, the removal of cadmium by using pumice coated with iron nanoparticles (INPs) from synthetic wastewater was investigated. The effects of parameters influencing adsorption: contact time (10-20 min), pH (3-9), initial cadmium concentration (25-125 mg l -1) and adsorbent dose (2-10 g l -1...

A dynamic mathematical model, based on the biochemical kinetic processes dominated in shallow free water systems was developed following the Activated Sludge Model (ASM) methodology. The model predicts plant mass and water uptake rate, BOD 5 and total nitrogen (TN) removal on a year round basis...

This study is focused on degradation of Direct Black dye, a common azo dye, catalyzed by nickel hydroxide in aqueous solution. Nickel sulfatehexahydrate, sodium hydroxide and sodium hypochlorite were used for synthesis of nickel hydroxide catalyst. The catalytic performance of nickel hydroxide for...

Biosorption is an emerging technique for water treatment utilizing abundantly available biomaterials.The potential feasibility of magnetic peanut hulls particle for removal of cationic dye (methylene blue) from aqueous solution was investigated. The effects of various experimental parameters were...

Low cost agricultural waste adsorbents can be viable alternatives to activated carbon for the treatment of contaminated wastewater. Sugarcane Bagasse, an abundant agriculture waste in Egypt, was used in the present study to prepare activated carbon. Batch adsorption experiments were conducted to...

The combined ultrasonic assisted/nanoparticle based procedure was described for an economical and rapid removal of meso-tetrakis (4-sulfonatophenyl) porphyrin (TSPP) by copper nanowires loaded on activated carbon (Cu-NW-AC). The synthesized Cu-NW-AC was investigated by scanning electron microscopy...

The coagulation potential of alginate extracted from marine brown algae, Sargassum sp. for the removal of Direct Blue 2 dye from aqueous solution was studied. Extracted alginate was characterised by Fourier Transform Infrared Spectroscopy (FT-IR) and Scanning Electron Microscopy (SEM) techniques...

The present study investigates the ability of formaldehyde treated Simarouba glauca seed shell powder for removal of methylene blue (MB) from aqueous solutions. Batch adsorption studies were carried out under various experimental conditions such as agitation time, dye concentration, adsorbent dose...

This study presents an evaluation of diatomite as a low cost adsorbent for Pb (II) removal from aqueous solutions under various conditions. The results demonstrate that adsorption of Pb (II) is strongly dependent on the pH of the solution. The effect of pH on adsorption of Pb (II) on diatomite was...

Adsorption of Cu (II) ions by untreated sugarcane bagasse (USCB) and treated sugarcane bagasse (TSCB) was investigated. Sugarcane bagasse was treated with 0.1M oxalic acid prior to TSCB adsorption studies. Dependence of Cu (II) adsorption on pH, contact time, temperature and initial concentration of...

In this study, Kandira stone, extensively used as a cladding material for building stone has been examined for the removal of an antibiotic Ciprofloxacin hydrochloride (CIP) from its aqueous solution. Batch experiments were performed to investigate the adsorption kinetics, equilibrium and...

The utilization of three novel and distinct agricultural waste materials, namely casuarina fruit powder (CFP), sorghum stem powder (SSP) and banana stem powder (BSP) as low cost adsorbents for reducing chemical oxygen demand (COD) levels of coffee industry wastewater has been examined. Prepared...

A Computational Fluid Dynamics (CFD) simulation using CFX, ANSYS 11.0, has been carried out using a multiphase flow model with an Eulerian-Eulerian approach for an airlift column photobioreactors (PBR). Transient simulations were performed for three inlet air flow, 2, 3 and 5 l/min. The contours for...

Cu 2O photocatalyst is synthesized by solvothermal method. Morphology and structure of Cu 2O photocatalyst are analyzed by SEM, XRD and N 2 sorption technique. The catalytic performances and reaction kinetics of Cu 2O photocatalyst for the degradation of methylene blue (MB) are investigated. The...

In this work, three samples of nitrogen-doped TiO 2 prepared at different calcination temperatures (400, 450 and 500 °C) were applied for the adsorption of Direct Black 38. Kinetic studies about the adsorption of Direct Black 38 on nitrogen-doped TiO 2 were performed under different initial dye...

In the present study, batch adsorption studies were performed for the removal of malachite green and acid blue 161 dyes from aqueous solutions by varying parameters such as contact time, waste marble dust amount, initial dye concentration and temperature. The equilibrium adsorption data were...

This paper reports on a systematic study of the degradation of anthracene and phenanthrene in sandy soil treated with an aqueous solution of KMnO 4. A kinetic model was developed based on the soil/solution ratio to predict the degradation rates of anthracene and phenanthrene. The degradation...

In this paper, the effects of the mixing ratio and particle size of coal were investigated using a thermogravimetric analysis (TGA). A method of Achar-Brindley-Sharp-Wendworth (ABSW) was applied to a simultaneous calculation of the kinetic parameters (including the apparent activation energy, the...