In the present study, the adsorption of Remazol Brillant Green 6B (RBG 6B) on chitin which characterized by BET, FTIR, XRD and SEM analysis was studied. Response surface methodology (RSM) was applied to determine interaction between solution pH, initial RBG 6B concentration and chitin dosage being...

In this study, raw boron enrichment waste was treated with hydrochloric acid and ultrasound at 35-kHz frequency for 60 minutes. To optimize the adsorption conditions for removal of methylene blue (MB) from synthetic wastewaters using raw boron enrichment waste (BEW), acid modified boron enrichment...

Clay of the Middle Atlas Mountains region, Morocco, was used to investigate the removal of heavy metals ions (Cadmium and Copper) from aqueous solutions with respect to several experimental conditions including pH, contact time, initial solute concentrations, temperature and ionic strength. Kinetic...

This study was conducted to remove Methylene Blue (MB) from aqueous solution using activated carbon prepared from N. microphyllum (AC-NM) as a new, cheap, and non-toxic. Design of experiments based on Response Surface Methodology (RSM) conducted to investigate the effect of variables namely; initial...

The biosorption of Cr (III), Zn (II) and Ni (II) ions from aqueous solution by dead blue algal biomass (Cyanophyta) was investigated in single metal system and batch conditions. Experimental parameters included contact time (0-140 min), pH (2-8), sorbent dose (0.1-2.0 g), initial concentrations (10...

Response surface methodology has been used to design experiments and to optimize the effect of independent variables responsible for higher adsorption of humic substances by activated carbon supported nanoscale zero-valent iron from aqueous solutions. The variables of initial concentration, time, pH...

In this study we investigate the impact of aerosols on different cloud regimes and amount of their precipitation over Tehran for the period of 2003-2014, utilizing data from Moderate-Resolution Imaging Spectroradiometer (MODIS), Tropical Rainfall Measuring Mission (TRMM) and surface data from local...

A wide range of technologies has been developed for the removal of dyes from wastewaters to decrease their environmental impact. Wastewater containing dyes is generally treated using more than one process such as adsorption/biosorption. In this study, effects of initial pH (2-8), initial azo dye...

In this paper, the removal of Maxilon Red GRL by adsorption onto raw soil sample known as Niğde (Bor) grape molasses soil and Fe+2/H2O2 reagent as advanced treatment processes were investigated. The effects of various experimental parameters such as initial Fe+2 and H2O2 concentrations, pH...

The activated charcoal (AC) was synthesized from banana leaf rim (BLR) through three activation methods; physical (BLRC), chemical (Z BLRC, zinc chloride) and microwave activation (MW BLRC). The AC was characterized using fourier transform infrared spectrometer (FT-IR), Thermogravimetric analysis...

In this study, potential of okra leaves for the removal of Ni(II), Cu(II), Pb(II) and Cd(II) from the mixed metal aqueous solution were evaluated. The data were analyzed by Freundlich, Langmuir, D-R, Flory-Huggins and Halsey adsorption models. Pseudo first order rate, Pseudo second order rate...

Hexavalent chromium Cr(VI) is one of the most toxic heavy metals in aqueous solutions, hence it is highly imperative to treat the wastewater containing Cr(VI) before its discharge. At present work, the rate of biosorption was studied under a variety of conditions, including initial Cr(VI)...

In last decades the search for new low cost sorbents that have heavy metal ions binding capabilities is a hot topic in the field of clean-up technologies. In this study, wastes of Romanian silver tree ( Abies alba) bark were explored for first time as green and economical sorbent for the removal of...

Low concentrations of contaminants in rainwater is the primary benefit of transforming it as an alternative source of drinking water. However, treatment is necessary as rainwater collects contaminants that are persistent in the environment such as lindane and E.coli. The combination of...

The composite media, Zeliac TM was developed with the initial aim to provide low cost adsorbent with promising adsorption capacity. This study was conducted to investigate the removal of UV absorbance at 254 nm (UV 254) in Kerian river water using Zeliac TM as the media. Batch experiments study was...

Adsorption is one of the methods that can be used for metal removal. In this study five metals were used cadmium, chromium, lead, copper and Nickel (Cd, Cr, Pb, Cu, and Ni) over a concentration range from 0.8 to about 7 mg l -1 for each metal. Adsorbents were prepared with increasing chitosan to...

Agriculture wastes like sugarcane bagasse are available in large quantities in Egypt. Various adsorbents from natural materials, industrial waste materials, agricultural by-products, and biomass based activated carbon can be used in the removal of various dyes. Raw Bagasse pith (RBP) was used to...

In this study, the removal of cadmium by using pumice coated with iron nanoparticles (INPs) from synthetic wastewater was investigated. The effects of parameters influencing adsorption: contact time (10-20 min), pH (3-9), initial cadmium concentration (25-125 mg l -1) and adsorbent dose (2-10 g l -1...

This paper reports on the fabrication, characterization and testing of iron oxide nanoparticles – powdered activated carbon (PAC) composites for water treatment and PAC regeneration by Fenton reactions. Different wet impregnation procedures and iron loadings were assessed in terms of organic...

Biosorption is an emerging technique for water treatment utilizing abundantly available biomaterials.The potential feasibility of magnetic peanut hulls particle for removal of cationic dye (methylene blue) from aqueous solution was investigated. The effects of various experimental parameters were...

Low cost agricultural waste adsorbents can be viable alternatives to activated carbon for the treatment of contaminated wastewater. Sugarcane Bagasse, an abundant agriculture waste in Egypt, was used in the present study to prepare activated carbon. Batch adsorption experiments were conducted to...

The combined ultrasonic assisted/nanoparticle based procedure was described for an economical and rapid removal of meso-tetrakis (4-sulfonatophenyl) porphyrin (TSPP) by copper nanowires loaded on activated carbon (Cu-NW-AC). The synthesized Cu-NW-AC was investigated by scanning electron microscopy...

The present study investigates the ability of formaldehyde treated Simarouba glauca seed shell powder for removal of methylene blue (MB) from aqueous solutions. Batch adsorption studies were carried out under various experimental conditions such as agitation time, dye concentration, adsorbent dose...

This study presents an evaluation of diatomite as a low cost adsorbent for Pb (II) removal from aqueous solutions under various conditions. The results demonstrate that adsorption of Pb (II) is strongly dependent on the pH of the solution. The effect of pH on adsorption of Pb (II) on diatomite was...

Adsorption of Cu (II) ions by untreated sugarcane bagasse (USCB) and treated sugarcane bagasse (TSCB) was investigated. Sugarcane bagasse was treated with 0.1M oxalic acid prior to TSCB adsorption studies. Dependence of Cu (II) adsorption on pH, contact time, temperature and initial concentration of...