Water contamination by heavy metals is a serious global problem due to increased environmental and health-related issues. In this study, we have comparatively investigated the heavy metal concentrations and mineral nutrient levels in Karasu river sediments and in plants samples of Phragmites...

Cerium oxide (CeO 2) nanoparticles (NPs) were used for the removal of cadmium (II), lead (II) and chromium (VI) ions in single aqueous solutions and in solutions with mixtures of the three metals. The adsorption studies were carried out at pH 5 and 7 using a systematic factorial experimental design...

Wetlands are sensitive ecosystems. They provide various services to man, but have been degraded to a large extent. Wetlands are of great importance, therefore they should be evaluated and monitored periodically in a planned way. Undoubtedly, identifying threatening factors for wetlands properly and...

The aim of this research is to study the behavior of different forest species in accordance with their ability to retain heavy metals on their leaves in order to select the most suitable species for urban and peri-urban use, which will contribute to the reduction of the continuously growing...

The Douro River lower basin water quality was studied regarding its concentration on 18 trace elements (Be, Al, Cr, Mn, Co, Ni, Cu, Zn, As, Se, Mo, Ag, Cd, Sb, Ba, Tl, Pb and U, measured by ICP-MS). Other physicochemical parameters, such as pH, conductivity, dissolved oxygen and water temperature...

The performance of a laboratory scale electrocoagulation system for the removal of Cr and Ni from model wastewater was studied systematically using iron and aluminum electrodes with an effective surface area of 13.8 cm2 and a distance of 4 cm. The influence of several parameters, such as initial...

A considerable number of diseases are directly related to environmental impact. Toxic metals such as Hg, Pb, Cd, and As may damage significantly the human health when they exceed certain levels in the body. For example specific precautions should be taken for the diet of pregnant women and the...

Pollution caused by traffic activities is increasingly becoming a great threat to human health in the region of Thrace in north-west of Turkey. Thirty six soil and plant samples were collected from the vicinity of Çorlu–Çerkezköy Highway. The samples were taken at distances of, 1, 25, 50, 100, 250...

Marine sediment contamination was evaluated in a set of sediment specimens collected from Izmir Bay (Turkey) and from Mytilene Harbor (Greece) in the Aegean Sea. Eight sediment specimens from Izmir (#IZ to #IZ8) and seven sediment specimens from Mytilene (#MYT1 to #MYT7) were analyzed for their...

This study investigates the partition of heavy metals in slag from the rotary kiln (SL), second combustion chamber ashes (SCCA), filter cake (FC) from a bag filter and flue gas (FG) emissions (both in particulate and gas phases) of the Istanbul medical waste incinerator (ISTAC). Eleven targeted...

Renewable water resources in Saudi Arabia are limited with groundwater as the major source for water supply. This study was conducted to assess the quality of groundwater in Almadinah Almunawarah, Saudi Arabia. Water samples were collected from 60 wells in 2010. Physical and chemical parameters were...

Agrochemicals, geochemical structure and industrial wastes create a potential source of heavy metal pollution in the aquatic environment. The porpuse of this study was to investigate the seasonal variations in five heavy metals (Cu, Zn, Cd, Pb and Cr) in the surface water of the Keritis river, one...

In the present work, wood and bone ash were used to remove metal cations from solutions. Cation-removal capacity of the ashes was analyzed by potentiometric titration. It was found that the capacity of wood ash was two times higher (37.3 meq g-1) than bone ash (15.2 meq g-1). Kinetics of metal ions...

A procedure that should be implemented for the evaluation of materials suitability, in terms of their use as metal retention agents, is presented. It derives from a review of materials and waste treatment mechanisms, which has been studied and is also presented. Lignite fly ash, agricultural ashes...

The US Environmental Protection Agency (USEPA) recently introduced more stringent arsenic regulations by lowering the maximum contaminant level (MCL) to 10 ìg l-1 (ppb) arsenic in drinking water. During the present study, an iron solution injection sand filtration process was designed and tested to...

The concentrations of ten industrial metals (Pb, Cd, Ni, As, Cr, Zn, Fe, Cu, Al and Mn) in 20 samples of rainwater collected at the station of Athens University Campus (AUC) during the cold period 1/10/97 - 31/3/98 were determined. In general, low concentrations were observed. The Spearman...

Fly ash (FA) and fluidized bed ash (FBA) solutions were evaluated as amendments for acid-disturbed lands, more specifically for treating acidic and metal contaminated soil. While titrating the ash materials with different volumes of acid, pH changes were monitored as a function of time and the acid...

In this paper, we report the joint use of FTIR spectroscopy and two dimensional correlation analysis (2DCORR) applied to the identification of the aggregation pathways of natural organic matter (i.e. humic substance) extracted from marine sediments and in the second case of study, to the comparison...

Various pollutants (e.g. boron and hexavalent chromium) are introduced into the aquatic environment from a variety of industrial operations causing damages to environment and affecting human health. Boron in irrigation water is of particular interest because it can have beneficial or toxic effect on...

In this article, the technical feasibility of various commercial adsorbents (activated carbon, clinoptilolite, and their mixture) for removal of Cr(total) ions from waste printing developer has been represent. Experimental tests were performed in laboratory batch mode. The adsorption data were...

The performance of electrocoagulation using iron electrodes for the removal of hexavalent chromium from synthetic aqueous solutions and actual industrial electroplating wastewater was studied. Parameters affecting the electrocoagulation process, such as initial pH, applied current density, initial...

The aim of the present work was to characterize particulate matter (PM) and elemental carbon (EC) indoor and outdoor concentration levels in the Athens area and to examine the contribution of ambient air to the observed indoor levels. 24-hr simultaneous indoor and outdoor PM10 and PM2.5 measurements...

Electric Arc Furnace Dust (EAFD) generated through the production of carbon and alloy steel products is classified as environmentally hazardous waste mainly because of its relatively high levels of Pb, Cd and Cr. The aim of the present work was to investigate the effect of the EAFD addition on the...

The use of phosphate slime or phosphate water in a Mediterranean region (Gafsa, Tunisia) was investigated through hydrologic modeling. The simulations were made using the Hydrus 1D software package for a typical soil in the area of Gafsa (Tunisia). Two main applications were examined: mixing the...

A mathematical model to simulate microbial growth and lag time is proposed in the present work in accordance with Sengor et al. (2009). The model is verified experimentally for a mixed microbial culture growing at metal free and at Cr(III) or Cr(VI) contaminated environments. The model is further...