Simulations were performed of the 3-D hydrodynamic circulation and of the associated water quality behavior in Mornos Reservoir, under real environmental conditions, during the period 2003-2005. The water quality simulations, guided by observations taken at the contributing tributaries and at the...

Anaerobic digestion of olive-mill wastewater (OMW) was carried out in a continuously fed mode bioreactor. The bioreactor was operated at different hydraulic retention times (HRTs), using OMW, either raw or pre-treated with white-rot fungi. Two different kinds of feed were tested in this process, one...

The efficiency of TiO2 photocatalysis induced by ultraviolet and visible irradiation and salt-free electrolysis over boron-doped diamond electrodes to inactivate total (TC) and fecal (FC) coliforms in secondary treated municipal wastewater was evaluated. Photocatalytic experiments were conducted...

Τhis paper focuses on optimal management of aquifers with pollution problems. Genetic algorithms are used as the optimization tool, while advective pollutant transport is simulated by means of a moving point technique. The approach is illustrated by means of two application examples. In the first we...

Environmental Impact Assessment (EIA) plays an important role in the framework of the efforts aiming at the formulation of a complete water resources management. In our paper this issue is examined in an integrated way. The following issues are particularly examined : the notion of the EIA in...

The present survey was carried out in the framework of MEDPOL Phase III (2004 – 2006), aiming to provide recent information for the long-term monitoring of pollution trends in selected susceptible marine environments along the Mediterranean coastline. Information was collected from a network of four...

More than 73% of the electrical power requirements of Greece are generated in lignite-fired power plants. Greece is the thirteenth largest coal and the fifth largest lignite producer in the world. The lack of domestic high-rank coals makes necessary to use low quality lignite for power generation in...

Plastic pellets (small granules, 1-5 millimeters in diameter) are widely distributed in the ocean and coastal zones all over the world. They are an industrial raw material for the plastic industry and are unintentionally released to the environment both during manufacturing and transport. These...

Maisiagala RADON type radioactive waste storage facility was commissioned in 1963 in a marshy, ecologically sensitive locality, where soluble radionuclides easily can penetrate and migrate with groundwater. To assure the requirements of radiation safety, the analysis of radionuclide leakage from the...

The waste to renewable energy source has become a priority in the wastes treatment field. The research goal is not only the wastes destruction but also a better thermal energy recovery from the processes. The municipal solid waste presents a high heterogeneity degree from the dimensional point of...

Biological treatment (aerobic and anaerobic) of industrial landfill leachate is limited by the presence of toxic contaminants (e.g., heavy metals) and recalcitrant (biopersistent) organics (e.g., polyphenols, pharmaceuticals, cosmetics, etc.,), hindering viable conditions for biomass proliferation...

Poor landfill gases cannot be used to drive gas engines or be burnt in gas flares. This follows why the combustion flame front velocity for poor gases becomes very low. From this moment the non-flammable poor landfill gases are polluting the environment. An energetical utilisation of very poor...

Green waste (leaves, grass and shredded twigs) was composted for 5.5 months in a wooden composting bioreactor, of 1 m3 capacity, using both passive convective aeration, facilitated by the design of the bioreactor, and manual turning. Temperature was measured daily, while samples were analysed for...

The use of Geographical Information Systems (GIS) for Landfill Sitting is studied. The necessary spatial information required to determine the candidate sites for any type of terrestrial area (Community/Prefecture/Region/Country) is examined. This spatial information is then used for site selection...

The restrictions in availability of forest-based raw materials along with favourable environmental policies towards alternative sources of raw materials have forced corrugated packaging industry to shift towards recycled paper and other fibre sources such as non-wood and agro-residues. The...

Consumption of plastic products has increased dramatically over the past few decades. This trend results in the generation of a vast waste stream that needs to be properly managed to avoid environmental damage. Increasingly stringent European legislation is setting new standards that promote the...

In a municipal solid waste management system, decreasing collection/hauling costs, which consist of 85 % of total disposal expenditure, can be carried out by a route optimization. Thus, a huge amount of economical benefits is getting furnished. If route optimization is performed in solid waste...

The Municipality of Athens (M.A.) currently comprises 7 municipal districts, 7 waste collection districts (WCD) and approximately 5800 residential blocks. Solid waste is collected daily on a 7 days per week basis. The M.A. comprises approximately 119 waste collection sub-districts (herein referred...

The toxicity of a chemical substance in a workplace depends on both its physical and chemical properties, the level of concentration in the breathing air, as well as, the duration of the exposure. In order to ensure healthy conditions at workplace, international organizations, such as the World...

The capacity of cyclodextrins in trapping VOCs is studied. Cyclodextrins (CDs) are a family of cyclic oligosaccharides that are composed of α-1,4-linked glucopyranose subunits. The most notable feature of cyclodextrins is their ability to form inclusion complexes (host–guest complexes) in solution...

According to the actual European context, including the development of risk free residential and industrial areas, the main demand lies in instant, accurate and elaborated information regarding environment quality and pollution risks. This paper presents a conceptual architecture for a versatile...

The paper describes the development of a fast and easy-to-use qualitative tool for preliminary assessments of urban air quality related to road traffic. The tool is particularly aimed at the ability and budget of local government. It uses a novel interaction matrix-type methodology combined with...

In order to accurately predict the pollutant concentrations and the plume trajectory in the atmosphere, it is necessary to take into account the effects of interactions between the plume and the surrounding environment. In fact, the atmospheric conditions have a lot of influence on the plume...

The EU Directives and legislation by worldwide environmental authorities impose constantly lower levels for the airborne pollutant emissions of internal combustion engines towards the goal of zero emission vehicles. During the last decade, engine manufacturers, refiners and fuel companies invest...

Vehicle emissions constitute the main source of atmospheric pollution in modern cities. The increasing number of passenger cars, especially during the last decade, resulted in composite traffic problems with serious consequences on emissions and fuel consumption. This project was carried out in the...