Chelating resins based on immobilised oxines are attractive solid-phase extraction (SPE) materials in the analysis of trace metals from environmental samples. The most common immobilisation procedure for bonding oxines to silica supports is time-consuming and incompatible with “green chemistry”...

Various pollutants (e.g. boron and hexavalent chromium) are introduced into the aquatic environment from a variety of industrial operations causing damages to environment and affecting human health. Boron in irrigation water is of particular interest because it can have beneficial or toxic effect on...

The procedure for the reliable determination of Be in natural waters by ETAAS was elaborated. Various modifiers (EDTA, Ca(NO3)2, Mg(NO3)2, Pd(NO3)2 and the mixture of Pd(NO3)2 and Mg(NO3)2) for the determination of beryllium was examined. The applicability of the selected Mg(NO3)2 as the appropriate...

The present study deals with the problem of soil contamination risk assessment for a region being actively impact by the routine production of Kremikovtzi metallurgical plant near Sofia, Bulgaria. Although the production is now cancelled, the soil pollution is present and needs careful assessment...

In this article, the technical feasibility of various commercial adsorbents (activated carbon, clinoptilolite, and their mixture) for removal of Cr(total) ions from waste printing developer has been represent. Experimental tests were performed in laboratory batch mode. The adsorption data were...

The effects of different mixture ratios of sewage sludge (SS), organic fraction of municipal solid waste (OFMSW) and yard trimmings (YT) on the performance of composting process were investigated in this study. The high water content and the proper carbon/nitrogen ratio make sludge ideal for this...

The performance of electrocoagulation using iron electrodes for the removal of hexavalent chromium from synthetic aqueous solutions and actual industrial electroplating wastewater was studied. Parameters affecting the electrocoagulation process, such as initial pH, applied current density, initial...

Particulate matter measurements were performed at the Akrotiri research station on the island of Crete (Greece) using an 8-stages Andersen non-viable impactor. The main purpose of the current work was to measure the ambient levels of PM10 particulate matter as well as the concentrations of metals...

Particulate matter is one of the most important indoor air pollutants involved in a number of adverse health effects, such as premature deaths and increased mortality of infants and other parts of sensitive population. This paper focuses on investigation of metal substances of suspended as well as...

Electric Arc Furnace Dust (EAFD) generated through the production of carbon and alloy steel products is classified as environmentally hazardous waste mainly because of its relatively high levels of Pb, Cd and Cr. The aim of the present work was to investigate the effect of the EAFD addition on the...

Halite–crystals produced in solar salts Works of Sfax Saline (E.S of TUNISIA), more often, contain fluid inclusions which fill inter– and intra–crystalline cavities and represent from 3 to 5 % in mass. With the sole aim of quantifying the impact of fluid inclusions on chemical quality of NaCl...

The removal of heavy metals from wastewaters is a matter of paramount importance due to the fact that their high toxicity causes major environmental pollution problems. One of the most efficient, applicable and low cost methods for the removal of toxic metals from aqueous solutions is that of their...

The main goal of this research study was the removal of Cu(II), Ni(II) and Zn(II) from aqueous solutions using peanut hulls. This work was mainly focused on the following aspects: chemical characterization of the biosorbent, kinetic studies, study of the pH influence in mono-component systems...

Sorption of toxic metal ions (Ni2+, Cu2+ and Cd2+) from Hevea brasiliensis bark carbon (HBBC) was carried out at 30±1 °C under various experimental conditions. Effect of various process parameters has been investigated by following the batch adsorption technique at 30 +1°C. The percentage removal...

The Mn and Pb of the total suspended particulates (TSP) in totally 95 1-h samples and As, Cd, Mn, Ni and Pb in totally 29 24-h samples have been determined by flameless graphite furnace atomic absorption spectrophotometry. The monthly TSP for July 1992 contained Mn and Pb 0.033 and 1.25‰ in downtown...

The use of phosphate slime or phosphate water in a Mediterranean region (Gafsa, Tunisia) was investigated through hydrologic modeling. The simulations were made using the Hydrus 1D software package for a typical soil in the area of Gafsa (Tunisia). Two main applications were examined: mixing the...

The dependence of Cd(II) and Cu(II) uptake by yeast cells on the age and temperature of cell culture was studied. Saccharomyces cerevisiae, Kluyveromyces marxianus and Debaromyces Hansenii were chosen as typical yeasts, while Cd(II) and Cu(II) as typical metal pollutants. Our results revealed that...

A High Cation Exchange Capacity (HCM) montmorillonite clay has been prepared by acetate treatment of Zenith clay. The HCM has been evaluated for metal-uptake from aqueous solutions. The present data show that the cation exchange sites can play a significant role in the adsorption of metals in...

The stringent new regulations to lower sulfur content in fossil fuels require new economic and efficient methods for desulfurization of recalcitrant organic sulfur. Hydrodesulfurization of such compounds is very costly and requires high operating temperature and pressure. Adsorption is a non...

Anionic poly(sodium acrylate), PANa, hydrogels bearing negatively charged –COO- groups were used as sorbents for the removal of colored organic or inorganic model pollutants, namely Crystal Violet and Cu2+, from water. It was found that PANa hydrogels adsorb stronger Cu2+ions than Crystal Violet, as...

A mathematical model to simulate microbial growth and lag time is proposed in the present work in accordance with Sengor et al. (2009). The model is verified experimentally for a mixed microbial culture growing at metal free and at Cr(III) or Cr(VI) contaminated environments. The model is further...

The present survey was carried out in the framework of MEDPOL Phase III (2004 – 2006), aiming to provide recent information for the long-term monitoring of pollution trends in selected susceptible marine environments along the Mediterranean coastline. Information was collected from a network of four...

More than 73% of the electrical power requirements of Greece are generated in lignite-fired power plants. Greece is the thirteenth largest coal and the fifth largest lignite producer in the world. The lack of domestic high-rank coals makes necessary to use low quality lignite for power generation in...

Biological treatment (aerobic and anaerobic) of industrial landfill leachate is limited by the presence of toxic contaminants (e.g., heavy metals) and recalcitrant (biopersistent) organics (e.g., polyphenols, pharmaceuticals, cosmetics, etc.,), hindering viable conditions for biomass proliferation...

Coals contain elements which, although usually found in concentrations lower than 1% (trace elements), can give rise to environmental or technological problems. After gasification most of these elements may occur in gas phase in different proportions. In order to avoid the problems that the presence...