This work investigated the potential of calcined electrocoagulation sludge (CES) within metals hydroxide generated during removal of boron using Al electrode for adsorption of fluoride from aqueous solution. The effects of contact time, pH of the solution (2-10), stirrer speed (50-450 rpm), initial...

In this work, three samples of nitrogen-doped TiO 2 prepared at different calcination temperatures (400, 450 and 500 °C) were applied for the adsorption of Direct Black 38. Kinetic studies about the adsorption of Direct Black 38 on nitrogen-doped TiO 2 were performed under different initial dye...

Removal of Fe(II) and Mn(II) ions from aqueous solution by fungal biosorbent Aspergillus sp. TU-GM14immobilized on Detarium microcarpum matrix was investigated in this study. Effects of biosorption parameters pH, biosorbent concentration, bead size and equilibrium time on Fe(II) and Mn(II) ions...

The removal of mercury by adsorption process using fly ash was investigated in this study. Mercury removal capacity of fly ash was performed by batch mode adsorption experiment with the effect of various parameters i.e., contact time (0.5-3.5) h, pH of 2-10, concentration of adsorbate (1, 5 and 10)...

The purpose of the present work is to test the possibility of using the spent tea dust and raw coir pith for the removal of methylene blue (MB) from aqueous solution. The effects of the contact time, adsorbent dosage and solution pH were studied in batch experiments at 27 °C. Results showed that a...

This study aimed to evaluate the sorption capability of an inexpensive and easily available Moroccan clay, called locally Ghassoul, to remove Rhodamine B (Rh-B) from aqueous solution. Experimental results showed that the equilibrium sorption data fitted well with the Langmuir isotherm and the...

In this study, the removal of a cationic dye, basic red 18, used in the textile industry with montmorillonite was investigated as a function of initial dye concentration, pH, agitation speed, adsorbent dosage, ionic strength, and temperature. Adsorption process was attained to the equilibrium within...

Laboratory studies reported earlier, have shown very promising results in the selective removal of dyes from aqueous solutions by a commercially available (super absorbent polymer) SAP, Jalshakti® (JS). JS is mesoporous in nature and is a potential adsorbent for the basic dyes studied. This paper...

In the present work, wood and bone ash were used to remove metal cations from solutions. Cation-removal capacity of the ashes was analyzed by potentiometric titration. It was found that the capacity of wood ash was two times higher (37.3 meq g-1) than bone ash (15.2 meq g-1). Kinetics of metal ions...

This work is aimed at evaluating the potentiality of adding a rhamnolipid biosurfactant in a petroleum-bearing soil. For this purpose, dehydrogenase activity and seed germination (Lactuca sativa) testes were performed before the biodegradation assays with different concentrations of rhamnolipid (1...

The ability of activated carbon and different low-cost by-products and waste material as sorbents to remove various reactive dyes from aqueous solutions and wastewaters was investigated. All aqueous dye solutions contained 2,000 mg l-1 NaCl, to mimic real dye wastewater. Batch kinetic and isotherm...

A pilot-plant study was carried out with the water supply to Athens water works filtered through a granular activated carbon (GAC) filter- adsorber. The objective of this study was to evaluate the performance of GAC for the removal from drinking water of the two main groups of disinfection by...

Waste tyre rubber granules were used as sorption medium in water treatment technology to remove up to 1 mg l-1 of 2,4-D and atrazine. The removal was found to be 83.2% and 87% corresponding to initial concentration of 0.5 and 1 mg l-1 of 2,4-D whereas it was 84.2% and 87.6% for atrazine. On the...

The efficacy of low cost adsorbing materials for removal of 2,4-D (2,4 dichloro phenoxy acetic acid) and atrazine (2-chloro-4-ethyamino-6-isopropylamino-1,3,5 triazine) herbicides from drinking water was evaluated. Five low cost adsorbents, viz. wood charcoal, rubber granules, bottom ash, macro...

Fly ash (FA) and fluidized bed ash (FBA) solutions were evaluated as amendments for acid-disturbed lands, more specifically for treating acidic and metal contaminated soil. While titrating the ash materials with different volumes of acid, pH changes were monitored as a function of time and the acid...

A mathematical model is presented, consisting of a two-layer, finite difference hydrodynamic submodel and a compartmental water quality sub-model. The model is calibrated with field data. Then, it is applied to Southern Evoikos Gulf, an open coastal water body of particular ecological significance...

This research work has been focused in the study of gallinaceous feathers, a waste that may be valorised as sorbent, to remove the Dark Blue Astrazon 2RN (DBA) from Dystar. This study was focused on the following aspects: optimization of experimental conditions through factorial design methodology...

In this article, the technical feasibility of various commercial adsorbents (activated carbon, clinoptilolite, and their mixture) for removal of Cr(total) ions from waste printing developer has been represent. Experimental tests were performed in laboratory batch mode. The adsorption data were...

Trihalomethanes are a major class of chlorination by-products in drinking water. They are formed when chlorine reacts with bromide (Br-) and natural organic matter (NOM) in source waters. Toxicology studies have shown all THMs to be carcinogenic or to cause adverse reproductive or developmental...

The removal of dyes from colored effluents, particularly from textile industries, is one of the major environmental concerns these days. Current methods for removing dyes from wastewaters are costly and cannot effectively be used to treat wide range of such wastewaters. This work describes the use...

The main goal of this research study was the removal of Cu(II), Ni(II) and Zn(II) from aqueous solutions using peanut hulls. This work was mainly focused on the following aspects: chemical characterization of the biosorbent, kinetic studies, study of the pH influence in mono-component systems...

Sorption of toxic metal ions (Ni2+, Cu2+ and Cd2+) from Hevea brasiliensis bark carbon (HBBC) was carried out at 30±1 °C under various experimental conditions. Effect of various process parameters has been investigated by following the batch adsorption technique at 30 +1°C. The percentage removal...

Rice husk carbon (RHC) has the ability to adsorb the dyestuff from aqueous solution. It may be useful low cost adsorbent for the treatment of effluents, discharged from textile industries. The effectiveness of RHC have been tested for the removal of colour from the wastewater samples containing...

The dependence of Cd(II) and Cu(II) uptake by yeast cells on the age and temperature of cell culture was studied. Saccharomyces cerevisiae, Kluyveromyces marxianus and Debaromyces Hansenii were chosen as typical yeasts, while Cd(II) and Cu(II) as typical metal pollutants. Our results revealed that...

The important advantage of zeolite applied to water treatment is its high porosity when comparing to other minerals. The porosity results in good hydrodynamic properties (the increase in the pressure loss on the zeolite filters is 1.5-2.0 times smaller than in the case of sand filters) and...