In this study, Kandira stone, extensively used as a cladding material for building stone has been examined for the removal of an antibiotic Ciprofloxacin hydrochloride (CIP) from its aqueous solution. Batch experiments were performed to investigate the adsorption kinetics, equilibrium and...

The utilization of three novel and distinct agricultural waste materials, namely casuarina fruit powder (CFP), sorghum stem powder (SSP) and banana stem powder (BSP) as low cost adsorbents for reducing chemical oxygen demand (COD) levels of coffee industry wastewater has been examined. Prepared...

This work investigated the potential of calcined electrocoagulation sludge (CES) within metals hydroxide generated during removal of boron using Al electrode for adsorption of fluoride from aqueous solution. The effects of contact time, pH of the solution (2-10), stirrer speed (50-450 rpm), initial...

In this work, combustion process of diesel and biofuel blends is studied experimentally in an isothermal oven. Blends with respectively 20%, 40% and 60% of Ethanol (E20, E40, E60), 20%, 40% and 60% of Methanol (M20, M40, M60), and 20%, 40%, 60%, 80% and 100% of Biodiesel (B20, B40, B60, B80, B100)...

In the present study, batch adsorption studies were performed for the removal of malachite green and acid blue 161 dyes from aqueous solutions by varying parameters such as contact time, waste marble dust amount, initial dye concentration and temperature. The equilibrium adsorption data were...

This study was aimed to investigate the use of Mustard stalk as a cheap, eco-friendly adsorbent with support matrix for the immobilization of microbial cell and for subsequent removal of 2,4-dichlrophenol(2,4-DCP) from waste water. A comparative batch study between adsorption as well as simultaneous...

Removal of Fe(II) and Mn(II) ions from aqueous solution by fungal biosorbent Aspergillus sp. TU-GM14immobilized on Detarium microcarpum matrix was investigated in this study. Effects of biosorption parameters pH, biosorbent concentration, bead size and equilibrium time on Fe(II) and Mn(II) ions...

The purpose of the present work is to test the possibility of using the spent tea dust and raw coir pith for the removal of methylene blue (MB) from aqueous solution. The effects of the contact time, adsorbent dosage and solution pH were studied in batch experiments at 27 °C. Results showed that a...

Removal of Al 3+ and Mn 2+ from solution by Trichoderma asperellum BHU216 immobilized on Irvingia gabonensis matrix in a batch system was investigated. Effect of biosorption conditions contact time, pH, bead size and spore load were studied. Equilibrium isotherms and re-usability of biosorbent were...

This study aimed to evaluate the sorption capability of an inexpensive and easily available Moroccan clay, called locally Ghassoul, to remove Rhodamine B (Rh-B) from aqueous solution. Experimental results showed that the equilibrium sorption data fitted well with the Langmuir isotherm and the...

In this study, the removal of a cationic dye, basic red 18, used in the textile industry with montmorillonite was investigated as a function of initial dye concentration, pH, agitation speed, adsorbent dosage, ionic strength, and temperature. Adsorption process was attained to the equilibrium within...

The objective of this pilot study was to evaluate the performance of Powdered Activated Carbon (PAC) for the removal of individual trihalomethanes (THMs) from chlorinated drinking water, Athens, Greece. The pilot treatment facility was located at the Water Treatment Plant of EYDAP (Athens Water...

The kinetic studies on the removal of Acid Violet-17 (AV) by adsorption on various adsorbents such as fly ash (FA), iron chromium oxide (ICO), lignite coal (LC), kapok fruit shell carbon (KC) and cashew nut shell carbon (CC) have been made and the results have been compared with that of commercial...

Adsorption of cadmium ions and phenol from aqueous solutions on chestnut (Castanea sativa) shell was studied. An incomplete 33 factorial design was applied to investigate the influence of the initial cadmium ions (20-60-100 mg l-1) or phenol concentration (0.01-0.255- 0.5 g l-1), temperature (10-25...

The ability of activated carbon and different low-cost by-products and waste material as sorbents to remove various reactive dyes from aqueous solutions and wastewaters was investigated. All aqueous dye solutions contained 2,000 mg l-1 NaCl, to mimic real dye wastewater. Batch kinetic and isotherm...

This research work has been focused in the study of gallinaceous feathers, a waste that may be valorised as sorbent, to remove the Dark Blue Astrazon 2RN (DBA) from Dystar. This study was focused on the following aspects: optimization of experimental conditions through factorial design methodology...

Water hyacinth Eichhornia crassipes was found to have biosorption capacity for cationic dyes, malachite green and methylene blue from aqueous solutions. To evaluate the biosorption capacity and characteristics, the effect of solution pH, initial dye concentration, temperature, dose of biosorbent...

In this article, the technical feasibility of various commercial adsorbents (activated carbon, clinoptilolite, and their mixture) for removal of Cr(total) ions from waste printing developer has been represent. Experimental tests were performed in laboratory batch mode. The adsorption data were...

The adsorption of Basic yellow 2 (BY2), from aqueous solutions onto Granular activated carbon (GAC) and its adsorption kinetics at different concentrations, GAC masses, initial pH values and temperatures were studied. The adsorption process was followed by an on-line spectrophotometric analysis...

Trihalomethanes are a major class of chlorination by-products in drinking water. They are formed when chlorine reacts with bromide (Br-) and natural organic matter (NOM) in source waters. Toxicology studies have shown all THMs to be carcinogenic or to cause adverse reproductive or developmental...

The main goal of this research study was the removal of Cu(II), Ni(II) and Zn(II) from aqueous solutions using peanut hulls. This work was mainly focused on the following aspects: chemical characterization of the biosorbent, kinetic studies, study of the pH influence in mono-component systems...

Sorption of toxic metal ions (Ni2+, Cu2+ and Cd2+) from Hevea brasiliensis bark carbon (HBBC) was carried out at 30±1 °C under various experimental conditions. Effect of various process parameters has been investigated by following the batch adsorption technique at 30 +1°C. The percentage removal...

Rice husk carbon (RHC) has the ability to adsorb the dyestuff from aqueous solution. It may be useful low cost adsorbent for the treatment of effluents, discharged from textile industries. The effectiveness of RHC have been tested for the removal of colour from the wastewater samples containing...

The adsorption of the herbicide atrazine in packed beds filled with solids modelling soil components, (silica and humic acid), was studied at conditions simulating the adsorption of atrazine in cultivated soils. The choice of only two constituents of soil in the experimental study was based on the...

The adsorption of polyacrylic acid (PAA) on hydroxyapatite (HAP) from HAP saturated solutions was studied in this work as a function of PAA concentration, temperature, pH and ionic strength. In all experiments, the adsorption was studied under conditions of negatively charged adsorbent and adsorbate...