The utilization of three novel and distinct agricultural waste materials, namely casuarina fruit powder (CFP), sorghum stem powder (SSP) and banana stem powder (BSP) as low cost adsorbents for reducing chemical oxygen demand (COD) levels of coffee industry wastewater has been examined. Prepared...

Phthalic acid esters, commonly called as phthalates, are of a common use in the industrial activities and are known with their hazardous impact on the environment and on humans such as endocrine disrupting agents, carcinogenic and toxic effects. These adverse effects have led to increasing interest...

This work investigated the potential of calcined electrocoagulation sludge (CES) within metals hydroxide generated during removal of boron using Al electrode for adsorption of fluoride from aqueous solution. The effects of contact time, pH of the solution (2-10), stirrer speed (50-450 rpm), initial...

Designed experiments are used to systematically examine the relationship between response variable and a set of experimental factors. In this study, 2 3 factorial design with center points was used to verify the selected experimental factors influence the removal efficiency and linearity assumption...

Present investigation is an exertion to explore safe means of water for the community in the water scare region. In order to accomplish such goal origin of springs as well as chemical analyses of groundwater samples from different locations were carried out. Four zones are discovered on the basis of...

In this work, three samples of nitrogen-doped TiO 2 prepared at different calcination temperatures (400, 450 and 500 °C) were applied for the adsorption of Direct Black 38. Kinetic studies about the adsorption of Direct Black 38 on nitrogen-doped TiO 2 were performed under different initial dye...

Several adsorbents have been tried out by researchers to remove different pollutants from wastewater. However, the adverse effect of these biosorbents on the treated water and the possibility of leaching new pollutants to the treated water have not been investigated. A batch technique was employed...

In the present study, batch adsorption studies were performed for the removal of malachite green and acid blue 161 dyes from aqueous solutions by varying parameters such as contact time, waste marble dust amount, initial dye concentration and temperature. The equilibrium adsorption data were...

This study was aimed to investigate the use of Mustard stalk as a cheap, eco-friendly adsorbent with support matrix for the immobilization of microbial cell and for subsequent removal of 2,4-dichlrophenol(2,4-DCP) from waste water. A comparative batch study between adsorption as well as simultaneous...

Removal of Fe(II) and Mn(II) ions from aqueous solution by fungal biosorbent Aspergillus sp. TU-GM14immobilized on Detarium microcarpum matrix was investigated in this study. Effects of biosorption parameters pH, biosorbent concentration, bead size and equilibrium time on Fe(II) and Mn(II) ions...

Tubular halloysite clay mineral and nanocrystalline TiO 2 were incorporated in the preparation of nanocomposite films on glass substrates via sol-gel method at 450ºC. The synthesis involves a simple chemical method employing nonionic surfactant molecule as pore directing agent along with the acetic...

In this study, a four-factor five-level Central Composite Design (CCD) was applied to develop mathematical model and optimize process parameters for malachite green dye (MG) removal from aqueous solutions using sepiolite. The individual, combined, and quadratic effects of four experimental factors...

The removal of mercury by adsorption process using fly ash was investigated in this study. Mercury removal capacity of fly ash was performed by batch mode adsorption experiment with the effect of various parameters i.e., contact time (0.5-3.5) h, pH of 2-10, concentration of adsorbate (1, 5 and 10)...

The purpose of the present work is to test the possibility of using the spent tea dust and raw coir pith for the removal of methylene blue (MB) from aqueous solution. The effects of the contact time, adsorbent dosage and solution pH were studied in batch experiments at 27 °C. Results showed that a...

In this study, the removal of a cationic dye, basic red 18, used in the textile industry with montmorillonite was investigated as a function of initial dye concentration, pH, agitation speed, adsorbent dosage, ionic strength, and temperature. Adsorption process was attained to the equilibrium within...

This study examines stabilization/solidification (S/S) techniques for coal ash/cement systems that involve the production of construction products while minimizing contamination and recycling the coal ash (CA). In these techniques, the polluted components of coal ash are fixed in a cement body via...

The objective of this pilot study was to evaluate the performance of Powdered Activated Carbon (PAC) for the removal of individual trihalomethanes (THMs) from chlorinated drinking water, Athens, Greece. The pilot treatment facility was located at the Water Treatment Plant of EYDAP (Athens Water...

The hydrochemical characteristics of groundwater in the island of Lesvos, Greece, were studied based on chemical analyses of groundwater samples collected from 30 locations covering all the island’s major aquifers hosted in different lithological formations. The Plagioclase dissolution was found to...

The air pollution has a great impact on the social and economic aspects all over the world. Thus, the interaction of materials with the atmosphere has received increased attention nowadays. In order to estimate the impacts of air pollution on the solid surfaces a suitable scientific basis is...

We have carried out a geochemical study on the behaviour of certain trace elements during the evaporative concentration of free brines (salinity from 41 to 400 ‰) of the solar salt works of Sfax saline (S.E of Tunisia). The elements concerned by this survey are Zinc, Cadmium, Manganese, Molybdenum...

The kinetic studies on the removal of Acid Violet-17 (AV) by adsorption on various adsorbents such as fly ash (FA), iron chromium oxide (ICO), lignite coal (LC), kapok fruit shell carbon (KC) and cashew nut shell carbon (CC) have been made and the results have been compared with that of commercial...

Laboratory studies reported earlier, have shown very promising results in the selective removal of dyes from aqueous solutions by a commercially available (super absorbent polymer) SAP, Jalshakti® (JS). JS is mesoporous in nature and is a potential adsorbent for the basic dyes studied. This paper...

Industrial facilities emit pollutant air that contains volatile organic compounds (VOCs) and reduced sulphur compounds (RSCs) which are nuisance, corrosive to materials and dangerous to health. In recent years, biofiltration has replaced numerous conventional processes (i.e. adsorption) due to its...

Adsorption of cadmium ions and phenol from aqueous solutions on chestnut (Castanea sativa) shell was studied. An incomplete 33 factorial design was applied to investigate the influence of the initial cadmium ions (20-60-100 mg l-1) or phenol concentration (0.01-0.255- 0.5 g l-1), temperature (10-25...

A procedure that should be implemented for the evaluation of materials suitability, in terms of their use as metal retention agents, is presented. It derives from a review of materials and waste treatment mechanisms, which has been studied and is also presented. Lignite fly ash, agricultural ashes...