The important advantage of zeolite applied to water treatment is its high porosity when comparing to other minerals. The porosity results in good hydrodynamic properties (the increase in the pressure loss on the zeolite filters is 1.5-2.0 times smaller than in the case of sand filters) and...

Activated carbon (AC) amendment for reduction of contaminant exposure in polluted soils and sediments has recently emerged as a promising remediation technique. Here, we provide a short overview of the state-of-the-art in activated carbon (AC) amendment to such sites. Most studies not only in...

A High Cation Exchange Capacity (HCM) montmorillonite clay has been prepared by acetate treatment of Zenith clay. The HCM has been evaluated for metal-uptake from aqueous solutions. The present data show that the cation exchange sites can play a significant role in the adsorption of metals in...

The speciation of Cr(VI) in Cromite Ore Processing Residue was investigated by means of bulk XRD, and a combination of micro-XRF, - XAS and –XRD at the Advanced Light Source (ALS), Berkeley, CA, U.S.A.. Bulk XRD yielded one group of phases that contained explicitly Cr(VI) in their structure, Calcium...

Anaerobic digestion of olive-mill wastewater (OMW) was carried out in a continuously fed mode bioreactor. The bioreactor was operated at different hydraulic retention times (HRTs), using OMW, either raw or pre-treated with white-rot fungi. Two different kinds of feed were tested in this process, one...

Τhis paper focuses on optimal management of aquifers with pollution problems. Genetic algorithms are used as the optimization tool, while advective pollutant transport is simulated by means of a moving point technique. The approach is illustrated by means of two application examples. In the first we...

The present survey was carried out in the framework of MEDPOL Phase III (2004 – 2006), aiming to provide recent information for the long-term monitoring of pollution trends in selected susceptible marine environments along the Mediterranean coastline. Information was collected from a network of four...

The waste to renewable energy source has become a priority in the wastes treatment field. The research goal is not only the wastes destruction but also a better thermal energy recovery from the processes. The municipal solid waste presents a high heterogeneity degree from the dimensional point of...

Biological treatment (aerobic and anaerobic) of industrial landfill leachate is limited by the presence of toxic contaminants (e.g., heavy metals) and recalcitrant (biopersistent) organics (e.g., polyphenols, pharmaceuticals, cosmetics, etc.,), hindering viable conditions for biomass proliferation...

Atrazine, a chlorinated s-triazine group of herbicide is one of the most widely used pesticides in the World. Due to its extensive use, long half-life and various toxic properties, it has very high environmental significance. Up to 22 mg l-1 of atrazine was found in ground water whereas permissible...

The wastewater of leather industry which is one of the most widespread industries having large amount of water consumption and very high pollution loads, may be characterized by several key parameters including toxic pollutants exhibiting toxicity. Therefore the effluent of leather tanning industry...

Nitrogen in the Ammonia form can have deleterious effects in water resources. Ion Exchange by zeolite and biological Nitrification processes are two proposed methods for removing Nitrogen compounds from wastewater and effluents. The main objective of this research was to investigate the efficiency...

In the electroplating process, various metal salts are used and the residues on the surface of electroplated materials are rinsed out as wastewater, followed by hydration in a wastewater disposal step. Although a variety of metals are concentrated in the sludge, the mixed heterogeneous state of...

At present, chemical processes are widely used to remove phosphorus and organic matter from water or wastewater either as the only advanced treatment method or as a pre-treatment stage to biological treatment, and aluminium salts have been traditionally used as coagulants. In the present study...

Μany applications in water quality management have a common key water quality parameter, dissolved oxygen, resulting to the critical role of aeration. On the other hand, in municipal and industrial wastewater, especially where aeration is applied, the presence of volatile organic compounds (VOCs)...

Combustion of poor quality coals is used today worldwide for energy production. The removal of polluting compounds, i.e. S, N, Hg and Cl from them prior to combustion is important not only for improving the coal quality, but also for meeting the strict environmental standards. Thus, a preventive...

Foaming and bulking problems in activated sludge treatment plants are associated to the presence of a variety of filamentous bacteria. However, it has been observed that M. parvicella is the most frequent filamentous microorganism causing sludge bulking and foaming, especially in treatment plants...

Sewer systems may often operate as bioreactors causing considerable wastewater quality changes and in some cases reducing the pollution load conveyed to the treatment plant. Conceptually, transformation of organic matter takes place both in the bulk water (by suspended micro-organisms) and by the...

Kinetics for the biological processes of nitrification, denitrification and carbon oxidation were studied in the aerobic and anoxic phases of a pilot scale Biological Nutrient Removal (BNR) plant treating municipal wastewater. The configuration of the treating system is based on the combination of...

The methylation of mercury has been investigated and documented mainly in sediments, fish and microorganisms, while limited number of relevant studies is available for wastewater. The procedure of mercury methylation can occur via biological pathway (by microorganisms) and via chemical or...

This paper aims at a comparative evaluation of the total cost of urban sewage processing units for several treatment systems, appropriate mainly for small capacity plants. The studied systems are: Oxidation Ditch (O.D.), Trickling Filter (T.F.), Rotating Biological Contactor (R.B.C.), Compact...

Since discovery of harmful disinfection by products (DBPs) like trihalomethanes (THMs) and haloacetic acids (HAAs) in chlorinated waters the removal of organic DBPs precursors gained priority in drinking water treatment. Historically, coagulation process was arranged to remove turbidity, typically...

Chlorination has been the most widely used technology for the disinfection of drinking water around the world. The main purpose for the disinfection of drinking water is to protect it against microbial contamination in the distribution systems and to prevent or at least control re-growth of...

The formation of Disinfection By-Products (DBPs) in drinking water results from the reaction of chlorine or other disinfectants added to the water with naturally occurring organic materials, and has raised concerns during the last decades because these compounds are harmful for human health. During...

The occurrence of THMs and HAAs, and other volatile organics in Istanbul (Turkey) and Salerno (Italy) surface water resources was investigated by the previous and present data obtained on raw, coagulated, pre-chlorinated, pre-ozonated water samples. The present drinking water directives/regulations...