Adsorption of cadmium ions and phenol from aqueous solutions on chestnut (Castanea sativa) shell was studied. An incomplete 33 factorial design was applied to investigate the influence of the initial cadmium ions (20-60-100 mg l-1) or phenol concentration (0.01-0.255- 0.5 g l-1), temperature (10-25...

Fly ash (FA) and fluidized bed ash (FBA) solutions were evaluated as amendments for acid-disturbed lands, more specifically for treating acidic and metal contaminated soil. While titrating the ash materials with different volumes of acid, pH changes were monitored as a function of time and the acid...

Water hyacinth Eichhornia crassipes was found to have biosorption capacity for cationic dyes, malachite green and methylene blue from aqueous solutions. To evaluate the biosorption capacity and characteristics, the effect of solution pH, initial dye concentration, temperature, dose of biosorbent...

The performance of electrocoagulation using iron electrodes for the removal of hexavalent chromium from synthetic aqueous solutions and actual industrial electroplating wastewater was studied. Parameters affecting the electrocoagulation process, such as initial pH, applied current density, initial...

The adsorption of Basic yellow 2 (BY2), from aqueous solutions onto Granular activated carbon (GAC) and its adsorption kinetics at different concentrations, GAC masses, initial pH values and temperatures were studied. The adsorption process was followed by an on-line spectrophotometric analysis...

Chlorine was accepted as an effective disinfectant for drinking water in early 1900s. Because of chlorination, chlorine has dramatically reduced the incidence of waterborne diseases. An unwanted side effect is the formation of harmful by-products upon chlorination. The most significant group of...

The removal of dyes from colored effluents, particularly from textile industries, is one of the major environmental concerns these days. Current methods for removing dyes from wastewaters are costly and cannot effectively be used to treat wide range of such wastewaters. This work describes the use...

Sorption of toxic metal ions (Ni2+, Cu2+ and Cd2+) from Hevea brasiliensis bark carbon (HBBC) was carried out at 30±1 °C under various experimental conditions. Effect of various process parameters has been investigated by following the batch adsorption technique at 30 +1°C. The percentage removal...

Biological treatment (aerobic and anaerobic) of industrial landfill leachate is limited by the presence of toxic contaminants (e.g., heavy metals) and recalcitrant (biopersistent) organics (e.g., polyphenols, pharmaceuticals, cosmetics, etc.,), hindering viable conditions for biomass proliferation...

In the electroplating process, various metal salts are used and the residues on the surface of electroplated materials are rinsed out as wastewater, followed by hydration in a wastewater disposal step. Although a variety of metals are concentrated in the sludge, the mixed heterogeneous state of...

The mechanism of Methylene Blue adsorption on biosolid (waste sludge) has been studied through batch experiments. The effects of various experimental parameters, such as pH (3- 11), biosolid dosage (1-10 g l-1), contact time (5-1440 min) and initial dye concentration were investigated. The results...

Μany applications in water quality management have a common key water quality parameter, dissolved oxygen, resulting to the critical role of aeration. On the other hand, in municipal and industrial wastewater, especially where aeration is applied, the presence of volatile organic compounds (VOCs)...

The leachability of Pb2+ from natural greek clinoptilolite was investigated according to the standard procedures TCLP/EPA/RCRA (1311), EPA Methods 1310, 1320 and DIN 38414-S4. Through SEM/EDAX analysis it was shown that lead was uniformly loaded onto the particles subjected to acid treatment...