Ozone initiated oxidation of 2-chloro,4-bromophenol, (CBP) in aqueous system catalyzed by 1, 2.5 and 5% loadings of 1:1 molar ratio of Ce-Zr oxide on TiO 2 were studied. The synthesized catalysts were characterized via BET, ICP, PXRD, TPD, TEM, SEM, and FT-IR analysis. The powder XRD data revealed...

This paper reports on the fabrication, characterization and testing of iron oxide nanoparticles – powdered activated carbon (PAC) composites for water treatment and PAC regeneration by Fenton reactions. Different wet impregnation procedures and iron loadings were assessed in terms of organic...

The photocatalytic activity of Mn doped TiO 2 for the ozonation of tetradifon pesticide in aqueous solution was studied. Various loadings of catalysts Mn/TiO 2 (1%, 2.5% and 5%) was prepared and characterized by standard analytical techniques. Photocatalyzed ozonation with 2.5% Mn/TiO 2 yielded 100%...

Ultramafics represent magmatic or metamorphic rocks which are characterized by high concentrations of Mg, Fe, Ni, Cr and Co and low concentrations of Ca, and K. Serpentine soils are weathered products of a range of ultramafic rocks composed of ferromagnesian silicates. The aim of this study was to...

Jarosite waste released from the zinc production process during the hydrometallurgical leaching of concentrates in Trepça lead-zinc smelter, Kosovo has serious environmental problems due to the presence of toxic metals such as Pb, Cd, Zn, As etc. Its disposal in open tailing damps has become a major...

Assessment of aridity conditions prevailing in a certain area is essential for the research on climate and climate change. Greece is characterized by a variety of climatic conditions such as drought conditions or flooding phenomena. The current study focuses on three selected areas within Greece...

Slaughterhouse wastewaters are characterized by a high organic content, mainly composed of proteins and fats. Therefore, these wastewaters should be treated efficiently prior to discharge into receiving bodies to avoid severe environmental pollution. This work aimed to characterize slaughterhouse...

Biosorption is an emerging technique for water treatment utilizing abundantly available biomaterials.The potential feasibility of magnetic peanut hulls particle for removal of cationic dye (methylene blue) from aqueous solution was investigated. The effects of various experimental parameters were...

Dust pollution is a major problem in opencast mines. Many activities are associated with generation of dust that makes a cloud of pollutant at the work environment and the surrounding areas. Activities as drilling, blasting, transportation, surface miner etc. are the principle sources of generation...

Having developed rapidly in recent years, Konya, one of Turkey’s most significant industrial cities, has been hosting production activities in sectors such as glass, chemistry, mining, metal and machine in the factories 96% of which located in the third Organized Industrial Zone. In common...

The combined ultrasonic assisted/nanoparticle based procedure was described for an economical and rapid removal of meso-tetrakis (4-sulfonatophenyl) porphyrin (TSPP) by copper nanowires loaded on activated carbon (Cu-NW-AC). The synthesized Cu-NW-AC was investigated by scanning electron microscopy...

The coagulation potential of alginate extracted from marine brown algae, Sargassum sp. for the removal of Direct Blue 2 dye from aqueous solution was studied. Extracted alginate was characterised by Fourier Transform Infrared Spectroscopy (FT-IR) and Scanning Electron Microscopy (SEM) techniques...

The present study investigates the ability of formaldehyde treated Simarouba glauca seed shell powder for removal of methylene blue (MB) from aqueous solutions. Batch adsorption studies were carried out under various experimental conditions such as agitation time, dye concentration, adsorbent dose...

Raw municipal landfill leachate is extremely polluted wastewater and it regards as one of the drawbacks of the sanitary landfill treatment method. If the untreated landfill leachate is discharged to the natural environment, a great problem for the environment can be created, particularly for the...

Proper Hospital healthcare Waste Management (HCWM) is imperative for ensuring public health and environmental protection. In this context, three Prefectural hospitals of Mytilene, Agrinio, and Messolonghi, were studied with respect to planning and management of infectious wastes, cost, training of...

The utilization of three novel and distinct agricultural waste materials, namely casuarina fruit powder (CFP), sorghum stem powder (SSP) and banana stem powder (BSP) as low cost adsorbents for reducing chemical oxygen demand (COD) levels of coffee industry wastewater has been examined. Prepared...

This paper presents an assessment of the impact of uncontrolled and unscientific disposal of MSW on ground water in Dhanbad city, India. In this study, ground water quality around municipal solid waste disposal sites was investigated. Ground water quality analysis was carried out on samples...

This paper reports the synthesis and the investigation of the properties and performance of Fe-Al catalysts modified with Cu or Co for the steam reforming of ethanol. The materials were prepared by the precipitation method with different Fe/Al ratios. The samples were characterised by the S BET, TG...

The Zlatibor mountain massif has significantly changed for the past 20 years due to the development of tourism, which has resulted in an increase in water consumption and environmental threats. This area abounds in considerable surface and groundwater resources, which are not utilised adequately...

Rainfall indices and Standardized Precipitation Index (SPI) were obtained for Rajasthan State characterized as the most sensitive and vulnerable state in India. Daily rainfall data of 35 years (1971-2005) for 31 well-spread stations were used to generate critical area maps. From the analysis of...

Tubular halloysite clay mineral and nanocrystalline TiO 2 were incorporated in the preparation of nanocomposite films on glass substrates via sol-gel method at 450ºC. The synthesis involves a simple chemical method employing nonionic surfactant molecule as pore directing agent along with the acetic...

Iron oxide materials were synthesized by an easy and rapid hydrothermal method using different iron precursors (FeCl 3∙6H 2O, Fe(NO 3) 3∙9H 2O and K 4Fe(CN) 6∙3H 2O), solution pHs (acid and basic) and reaction times (3 h and 6 h). The synthesized materials were thoroughly characterized by...

CO 2 capture and storage (CCS) projects are presently developed to reduce the emission of anthropogenic CO 2 into the atmosphere. CCS technologies are expected to account for the 20% of the CO 2 reduction by 2050. Geophysical, ground deformation and geochemical monitoring have been carried out to...

The Douro River lower basin water quality was studied regarding its concentration on 18 trace elements (Be, Al, Cr, Mn, Co, Ni, Cu, Zn, As, Se, Mo, Ag, Cd, Sb, Ba, Tl, Pb and U, measured by ICP-MS). Other physicochemical parameters, such as pH, conductivity, dissolved oxygen and water temperature...

Calibration of rainfall-runoff models is made complicated by uncertainties in data, and by the arbitrary emphasis placed on various magnitudes of the model residuals by most traditional measures of fit. Current research highlights the importance of driving model identification by assimilating...