WEEE is a fast-growing waste stream that includes potentially hazardous substances, but also valuable secondary raw materials, which can be recovered by adequate recycling and recovery treatment. In the last years, the research interest has moved from the conventional recycling (recovery of ferrous...

Biomining is the common term used to define processes that utilize biological systems to facilitate the extraction of metals from ores. Nowadays, a biomining concept can be defined as a two stage combined biological systems (1st stage bioleaching and 2nd stage biosorption) in order to perform the...

Technological development combined with a rapid and global market penetration has led to high volumes of Waste Electrical and Electronic Equipment (WEEE). Simultaneously, the use-phase has become shorter resulting in an annual growth rate of WEEE between 3-5%, which makes WEEE one of the fastest...

In Jordan and as in many other Mediterranean countries olive oil production is one of the major agricultural production, it is estimated that the annual production of olive oil in Jordan approximately 21.5 thousand tons per year. O the other hand the process of olive oil extraction generates around...

Sustainable recovery of critical metals (CM) from Waste Electrical and Electronic Equipment (WEEE) in the European Union (EU) requires information for detailed analysis, monitoring and decision-making. Related knowledge is currently insufficient or disseminated through the network of stakeholders...

This paper presents the main achievements of a hydrometallurgical process to recover base and precious metals from waste printed circuit boards (WPCB). The technology comprises a first leaching process performed in a two-step counter current way with sulfuric acid and hydrogen peroxide for base...

Waste mobile phone is one of the subgroups of e-waste which is defined as discarded electronic products in the Philippine context. This study estimated current and projected quantities of waste mobile phones in the country using feed forward neural network. The neural network architecture used had...

The objective of this study is to examine the ability of a compost material for removing {Cu}^{2+} from aqueous solutions with different parameters using continuous fixed-bed column. Compost was characterized by using Fourier transform infrared spectroscopy which revealed that the metal binding is...

A wide range of technologies has been developed for the removal of dyes from wastewaters to decrease their environmental impact. Wastewater containing dyes is generally treated using more than one process such as adsorption/biosorption. In this study, effects of initial pH (2-8), initial azo dye...

Agriculture wastes like sugarcane bagasse are available in large quantities in Egypt. Various adsorbents from natural materials, industrial waste materials, agricultural by-products, and biomass based activated carbon can be used in the removal of various dyes. Raw Bagasse pith (RBP) was used to...

The aim of the present study was to synthesize a sorbent, for arsenic removal from aqueous solutions, reusing two waste materials (slag and red mud). The sorbent was prepared after chemical and thermal treatment, during which amorphous silica sol and FeOOH sol were produced simultaneously and form...

The utilization of three novel and distinct agricultural waste materials, namely casuarina fruit powder (CFP), sorghum stem powder (SSP) and banana stem powder (BSP) as low cost adsorbents for reducing chemical oxygen demand (COD) levels of coffee industry wastewater has been examined. Prepared...

During the last years, the waste electrical and electronic equipment (WEEE) are gathering attention, as a very special section of waste. In fact, they have been proven to be source for the recovery of metals. In the present study printed circuit boards (PCBs) were cut and treated thermally at 500oC...