The present paper discusses an integrated electrochemical decolorization/degradation treatment procedure of indigo carmine dye, which comprises electrocoagulation, electrooxidation and advanced electrochemical oxidation using the electro-Fenton process. The electrocoagulation process is performed by...

Tubular halloysite clay mineral and nanocrystalline TiO 2 were incorporated in the preparation of nanocomposite films on glass substrates via sol-gel method at 450ºC. The synthesis involves a simple chemical method employing nonionic surfactant molecule as pore directing agent along with the acetic...

Iron oxide materials were synthesized by an easy and rapid hydrothermal method using different iron precursors (FeCl 3∙6H 2O, Fe(NO 3) 3∙9H 2O and K 4Fe(CN) 6∙3H 2O), solution pHs (acid and basic) and reaction times (3 h and 6 h). The synthesized materials were thoroughly characterized by...

The photocatalytic degradation of caffeine has been investigated in aqueous suspensions of titanium dioxide (TiO 2) by monitoring process efficiency at varying TiO 2 (25 - 175 mg l -1) and initial drug concentrations (0.5 - 9.5 mg l -1). The use of the response surface methodology (RSM) allowed to...

Solar simulated heterogeneous photocatalysis (SSHP) with suspended TiO 2 was investigated in the inactivation of tetracycline resistant/sensitive Enterococcus (TRE/TSE) strains in the effluent of an urban wastewater treatment plant (UWTP). The effect of solar simulated disinfection (SSD) on the...

This paper is focused on modelling the degradation of micropollutants by solar photo-Fenton at pilot plan scale. To this aim, a three pesticide mixture (acetamiprid, thiabendazole and imazalil, 100 μg l -1 each) was treated by photo-Fenton in simulated secondary effluent. The model covered a wide...

Presence of antibiotics in the environment specially in aqueous environments is considered a major warning about health and environment. Thus, this study aims the efficiency of coupled process of Activated Carbon (AC) prepared from mango seed+ZnO under UV irradiation as an advanced oxidation process...

Solar assisted Photo Fenton was compared with advanced oxidation processes for their color and COD removal efficiency and cost effectiveness. H2O2 alone appeared to be inefficient to reduce color and COD content of any effluent. The performance of Fenton process was slightly better, color and COD...

The effect of ultrasonic waves (US) was studied on the degradation of Malachite Green (MG) as a model contaminant from textile industry by direct photolysis with ultraviolet (UV) radiation and UV/H2O2 processes. The US (35 kHz) and UV (253.7 nm) radiations were carried out with an ultrasonic bath...

Advanced oxidation processes (AOPs) are widely used for the removal of recalcitrant organic constituents from industrial and municipal wastewater. The aim of this study was to review the use of titanium dioxide/UV light process, hydrogen peroxide/UV light process and Fenton’s reactions in wastewater...

Heterogeneous photocatalysis is an advanced oxidation process (AOP) which has been widely studied by numerous researchers in the world and is used to degrade or remove a wide range of pollutants in water and air. The photocatalytic oxidation and mineralization of phenol in aqueous catalyst...

The combinations of H2O2/Fe+2, UV/H2O2/Fe+2 and UV/H2O2 process were investigated on treatment of oil recovery industry wastewater. Treatment of oil recovery industry wastewater, a typical high pollution strength industrial wastewater (chemical oxygen deman (COD): 21000 mg l-1, biological oxygen...

C.I. Acid Orange 7 (AO7) commonly used as a textile dye and could be degraded by UV/ZnO, UV/H2O2 and UV/H2O2/Fe (III) (photofenton) processes. In the photocatalytic degradation of dye by UV/ZnO process, effect of some parameters such as UV irradiation time, presence of ZnO and UV irradiation, pH...

This study was conducted to assess the removal efficiency of Di-n-butyl phthalate (DnBP) from aqueous medium using the photo-Fenton process. The Fenton's reagent that consists of a mixture of hydrogen peroxide (H2O) and ferrous ions (Fe2+) was used to generate the hydroxyl radical (OH0) that attacks...

The speciation of Cr(VI) in Cromite Ore Processing Residue was investigated by means of bulk XRD, and a combination of micro-XRF, - XAS and –XRD at the Advanced Light Source (ALS), Berkeley, CA, U.S.A.. Bulk XRD yielded one group of phases that contained explicitly Cr(VI) in their structure, Calcium...

The waste to renewable energy source has become a priority in the wastes treatment field. The research goal is not only the wastes destruction but also a better thermal energy recovery from the processes. The municipal solid waste presents a high heterogeneity degree from the dimensional point of...

Biological treatment (aerobic and anaerobic) of industrial landfill leachate is limited by the presence of toxic contaminants (e.g., heavy metals) and recalcitrant (biopersistent) organics (e.g., polyphenols, pharmaceuticals, cosmetics, etc.,), hindering viable conditions for biomass proliferation...

The use of conventional textile wastewater treatment processes becomes drastically challenged to environmental engineers with increasing more and more restrictive effluent quality by water authorities. Conventional treatment such as biological treatment discharges will no longer be tolerated as 53%...

Photocatalysis by titanium dioxide (TiO2) is a water treatment method. Pseudomonas aeruginosa is a microorganism resistant to chlorine and UV-C irradiation. TiO2 photocatalytic technology can destroy bacteria, which are resistant to oxidative destruction of cell membrane caused by sole UV...

This review provides a general overview of the application of chemical oxidation to hydrophobic contaminants in the form of non-aqueous phase liquids (NAPLs). Three types of chemical oxidation processes, conventional activated persulfate, permanganate, and ozonation, along with three advanced...